Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Do not wash the work top or floor with hydrochloric acid.
OIL-COLLECTING TANK
Check regularly that the oil level does not reach the brim of the oil collector and that the filter is free. Empty it regularly
and clean the filter. The pull-out handle on the top edge makes it easier to catch hold of the tank..
3.2 SPECIAL MAINTENANCE
At regular intervals (at least once a year or more often in cases of frequent use), service the appliance thoroughly.
This includes checking the gas circuit, checking parts for damage and if necessary lubricating the taps if they are difficult
to use. Contact a specialized and experienced technician. A maintenance contract should be taken out with a centre
approved by the company.
3.3 CONTROL AND SAFETY DEVICES
If the appliance is not used for a long time or if it does not work or works irregularly, the gas stopcock upstream of the
appliance must be shut off.
All the parts of the appliance that are subject to wear can easily be accessed from the front of the appliance by opening
the door or after removing the front.
All the couplings use a dado and bicono, so great care must be taken in handling these components. If the part is
damaged during dismantling or reassembly it must be replaced with a new one.
If the oil exceeds the set temperature the safety thermostat breaks the contact with the thermocouple. To restart the
appliance, open the door and press the red push-button.
Warning. As the safety thermostat may have been triggered by a faulty gas valve or thermostat, any faulty parts must be
replaced by an authorized technician before the appliance is started up again.
TECHNICAL SPECIFICATIONS TABLE FOR CATEGORY II2H3+ GAS FRYERS
MOD.
RATED
OUTPUT CAPACITY
Kw
P.C.I.
70FRG-17R
16,5
80FRG-17R
16,5
70FRG-34R
33
80FRG-34R
33
80FRG-22R
21
80FRG-44R
42
11FRG-17R
16,5
11FRG-22R
21
11FRG-16R
11.6
THE
MANUFACTURER
INCORRECTINTERVENTIONS, TAMPERING WITH THE APPLIANCE, MISUSE, POOR MAINTENANCE,
NONCOMPLIANCEWITH CURRENT REGULATIONS AND INEXPERT USE.
THE MANUFACTURER RESERVES THE RIGHT TO WITHOUT NOTICE MODIFY THE FEATURES OF
THEAPPLIANCES DESCRIBED IN THIS MANUAL.
TANK
PRESSURE IN mbar
NOZZLES
G30
G31
N° X Lt
1 x 17
120K
1 x 17
120K
2 x 17
120K
2 x 17
120K
1 x 22
140K
2 x 22
140K
1 x 17
120K
1 x 22
140K
2 x 8
120K
ACCEPTS
NO
RESPONSIBILITY
13
G30/G31 = 28/37
G20 = 20
LIGHT
G20
G30
G31
N°
180L
20
180L
20
180L
20
180L
20
200L
20
200L
20
180L
20
200L
20
180L
20
FOR
AIR
G20
G30
G20
G31
N°
mm
mm
35
OPEN
35
OPEN
35
OPEN
35
OPEN
35
OPEN
OPEN
35
OPEN
OPEN
35
OPEN
OPEN
OPEN
35
35
OPEN
HARM
CAUSED
18
18
18
18
18
18
BY
Publicité
Table des Matières
