Chimney Draught - Nordpeis Q-23FL Manuel D'installation

IMPORTANT SAFETY PRECAUTIONS!
1. Please follow the installation manual when
connecting your stove / ireplace to the chimney /
lue pipe. If connected diferently from instruction
please, consider the heat radiation from the lue
pipe to the surrounding materials.
2. Before use, please carefully read the user manual
and follow the instructions.
3. Integrated or deined convection openings may
never be reduced or partially obstructed. This may
lead to overheating, which again can cause house
ire or serious damage to the product.
4. Use only designated ire starters. Never use
gasoline, diesel or other liquids to start the ire.
This may cause explosions!
5. Never use other fuel than natural dry chopped
wood. Briquettes, peat, coke, coal and waste
from construction materials develops far higher
temperatures and emissions than natural wood.
Since your product has been designed for use
with natural wood only, other fuels may damage
the product, chimney and surrounding
constructions.
6. In case of damage to glass or door gasket, all use
of the product must be discontinued until the
damage has been repaired.
Failure to follow these precautions will leave your
warranty void and expose people and property to
danger.
Advise: Even if not required in your area, it is always
wise to have a qualiied stove / ireplace itter do the
installation, or at least the inal inspection before use.
INDEX
1. Prior to assembling the insert
Chimney Draught
Shared lue gas system
Air Supply
2. Technical Information
3. Distance to combustible material
4. Assembly
Removing the insert from the pallet
Operational control
Pulley radiation shield
Self closing door
Cleaning the glass
Radiation shields
Powerstone (accessory)
Flue collar and connection
Painting the surround
5. Lighting the ire for the irst time
6. Maintenance
Cleaning and inspection
Ashes
Thermotte™
Door and glass
7. Warranty
8. Advice on lighting a ire
Some advice in case of combustion problems
1. Prior to assembling the insert
All our products are tested according to the latest
European requirements and also to the Norwegian
standard NS 3058 and NS 3059, which include particle
tests. However, several European countries have local
regulations for installation of ireplaces, which change
regularly. It is the responsibility of the client that these
regulations are complied with in the country/region
where the ireplace is installed. Nordpeis AS is not
responsible for incorrect installation.
Important to check
(please note that this list is not exhaustive):
distance from irebox to combustible/lammable
•
materials
• insulation materials/requirements between
ireplace surround and back wall
size of loor plates in front of ireplace if required
•
lue connection between irebox and chimney
•
insulation requirements if lue passes through a
•
lammable wall

Chimney draught

Compared with older models, the clean burning inserts
of today put signiicantly higher demands on the
chimney. Even the best insert will not work properly
GB
17
17
18
18
18
19
19
19
19
19
19
19
19
20
20
20
20
20
20
20
21
21
21
21
23
17