Assembly - MPF Black Beat Mode D'emploi

Assembly

64
Step 1
Remove all packaging materials
and arrange all parts neatly on the
floor.
Step 2
Remove nuts (6) and washers (5)
from front stabilizer bar (2) and rear
stabilizer bar (3). Attach front
stabilizer bar (2) and rear stabilizer
bar (3) to the main frame (1). Place
nuts and washers again and secure
the screws with the supplied
wrench.
Step 3
Remove nuts and washers from
handlebar (12). Connect the upper
resistance cable (13) to the lower
resistance cable (14). Remove the
metal clip. Connect the upper
computer cable (19) to the lower
computer cable (21).
Step 4
Slide the handlebar (12) onto the
main frame (1) and secure the
assembly with the two screws and
washers.