Installation Of The Outdoor Unit; Clearances; Installation; Attachment To The Ground - SystemAir CONDENSATION PAR AIR 2450 Manuel D'installation Et De Maintenance

INSTALLATION OF THE OUTDOOR UNIT

Place the AIR COOLED condenser outdoors in a location not
accessible to the public and without air pollution (smoke, acid, etc...).

CLEARANCES.

Respect the minimum dimension indicated for correct operation and to
avoid air recycling, even partially between air intake and air discharge.
X

INSTALLATION.

Install and attach the AIR COOLED condenser on a masonry surface (concrete slab).

ATTACHMENT TO THE GROUND

74 and 104 with the feet X used for fixing the unit to its pallet.
151
4 oblong holes 9x16 mm
or by the holes drilled in the bosses situated under the base of the unit. They can be reached after dismantling the
side panels.
101
4 holes Ø10 mm
760 230
74 74
935 102
74 74
11
229 1085 229
104 104
4 oblong holes 9x16 mm
1340 102
101
104 104
4 holes Ø10 mm
Access panel
electrical section