Safety Instructions - SATA SATAjet K 1800 spray mix Mode D'emploi

Operating instructions
EN
1.4. Accessories, spare and wear parts
Always only use original SATA accessories, spare parts and wear parts.
Accessories not supplied by SATA have not been tested and approved.
SATA assumes no liability for damage caused by the use of non-approved
spare parts, accessories and wear parts.
1.5. Warranty and liability
The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA is not liable in case of
■ When the operating instructions are disregarded.
■ When the product is used in other than the intended ways of usage.
■ When untrained staff is employed.
■ When no personal protection equipment is worn.
■ Failure to use original accessories, spare and wear parts
■ When the product is manipulated, tampered with or technically modi-
fied.
■ Natural wear / and tear
■ In case when the product has been exposed to untypical shockloads
and impacts during usage.
■ Incorrect assembly and dismantling work
2.

Safety Instructions

Always read and heed all instructions given below. Failure to comply can
result in malfunctions or cause serious and even fatal injuries.
2.1. Requirements regarding personnel
The spray gun may only be used by experienced skilled workers and
instructed persons who have thoroughly read and understood these oper-
ating instructions. People whose reactions have been adversely affected
by drugs, alcohol, medication or by any other means are prohibited from
handling the spray gun.
2.2. Personal Protection Equipment
Always use approved breathing, hearing and eye protection, suitable pro-
tective gloves, workwear and safety boots when using the spray gun and
during cleaning and maintenance work.
122
SATAjet K 1800 spray mix