Technical Data; Parts Of The Device; Set-Up/Start-Up - Festool TKS 80 EBS Notice D'utilisation D'origine

English
4

Technical data

Bench-mounted circular saw
Power
TKS 80 EBS 220–240 V
TKS 80 EBS 230 V
TKS 80 EBS 230 V
Speed (no-load)
Locating bore
Cutting height at 90°/45°/47°
Inclination angle
Table dimensions (L x W)
Table height, legs unfolded
Table height, legs folded away
Weight as per EPTA procedure 01:2014
5

Parts of the device

[1-1] Accessory holder
[1-2]
Side handle areas
[1-3] 4 V-profiles
[1-4] Spacer wedge for grooving
[1-5] Table insert
[1-6] Spacer wedge with guard support
[1-7]
Guard
[1-8] Safety sticker
[1-9]
Preset profile setting rail
[1-10] Fine adjustment
[1-11]
Inclination angle setting
[1-12] Rotary knobs for foldaway legs
[1-13] Scale
[1-14]
Cutting height setting
[1-15] Angle indicator
[1-16]
Push stick holder
[1-17] Foldaway legs
[1-18]
Closing flap
[1-19] Switch panel
[1-20] Transport rollers
[1-21]
Shipping protection
The illustrations specified are located at the be­
ginning and end of the operating instructions.
30
EU (without DK), GB
CH, ZA
DK, AUS
6
Heavy transport packaging with bench-
mounted circular saw
Risk of injury
► The transport packaging with the bench-
6.1
Unauthorised voltage or frequency
Risk of accidents
► The mains voltage and the frequency of the
► Before each use of the power tool, check
► For use outdoors, only use the approved
0–80 mm/0–56 mm/0–54 mm

Set-up/start-up

CAUTION
mounted circular saw must be carried and
unpacked by two people.
Setting up the TKS 80 EBS
WARNING
power source must correspond to the
specifications on the name plate.
the power cable and the mains plug. Any
damage must only be rectified by a special­
ist workshop.
extension cable and cable connections.
TKS 80 EBS
2200 W
1900 W
2000 W
1700–3500 rpm
Dia. 30 mm
-2°–47°
690 x 580 mm
900 mm
385 mm
37.0 kg