Storage; Service And Maintenance; Accessories; Environment - Festool TKS 80 EBS Notice D'utilisation D'origine

Select the clearance to the rip fence in
such a way that the groove that has al­
ready been sawed is not on the side of
the stop.
The second cut on the thin side of the work­
piece can be produced.

11 Storage

► Pull the mains plug out of the socket.
► Remove the extractor hose.
► Store the accessories included in the scope
of delivery the accessory holders or the
brackets provided for that purpose (see
section 7 ).
► Remove accessories not included in the
scope of delivery.
► Do not store the TKS 80 EBS outside.
CAUTION
Cuts due to protruding parts
► Store the bench-mounted circular saw in
an upright position.

12 Service and maintenance

WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main­
tenance work.
► All maintenance and repair work which re­
quires the motor housing to be opened
should always be carried out by an author­
ised service workshop.
WARNING
Incorrect testing may damage the machine
and injure users
► Special information is required for testing
the electrical safety. This is available from
your country's Festool service workshop.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
Always use original Festool spare
EKAT
4
parts. Order no. at:
www.festool.co.uk/service
5
3
2
1
► Damaged safety devices and components
must be repaired or replaced in a recog­
nised specialist workshop, unless otherwise
indicated in the operating instructions.
► To ensure constant air circulation, always
keep the cooling air openings in the housing
clean and free of blockages.
► Use an extractor to remove dust deposits.
► If the extraction channel becomes clogged
with wood splinters:
▷ Open the saw blade cover (see section
9.10 ).
▷ Extract the blockage by means of suc­
tion on the saw blade cover.
► Wind up the power cable again once the
work is complete (Fig. 3b).
The tool is equipped with special self-discon­
necting carbon brushes. If they wear out, the
power supply is disconnected automatically and
the tool stops.

13 Accessories

Use only original Festool accessories.
Refer to the Festool catalogue for the order
numbers of accessories and tools or find them
online at www.festool.co.uk.
In addition to the accessories described,
Festool also provides a comprehensive range of
system accessories that allow you to use your
saw more effectively and in diverse applica­
tions, e.g.:
• Saw blades for different materials.
• Width extension table
• Length extension table
• Sliding table
• Rip fence

14 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with the European Di­
rective on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.
Information on REACH: www.festool.com/reach
English
41