Technical Data; Parts Of The Device; Intended Use; Commissioning - Festool TSC 55 REB Notice D'utilisation D'origine

English
3

Technical data

Cordless plunge-cut saw
Motor voltage
Speed (idle) 1 x 18 V
Speed (idle) 2 x 18 V
Inclination
Cutting depth at 0°
Cutting depth at 45°
Saw blade dimensions
Weight excl. battery pack
4

Parts of the device

[1-1] Handles
[1-2]
Rotary knobs for angle adjustment
[1-3] Angle scale
[1-4]
Lever for changing blades
[1-5] Switch-on lock
[1-6] On/Off switch
[1-7] Extractor connector
[1-8] Release buttons for undercuts -1° to
47°
[1-9] Adjustable jaws
[1-10] Speed control
[1-11] Battery packs

[1-12] Capacity display

[1-13] Button for releasing the battery pack
[1-14] Split scale for cutting depth stop
(with/without guide rail)
[1-15] Cutting depth adjusting screw for re­
sharpened saw blades
[1-16] Cutting depth stop
[1-17] Cut indicator
[1-18] Viewing window / chipguard
[1-19] Splinterguard
The illustrations specified are located at the be­
ginning and end of the operating instructions.
Accessories shown or described are not always
included in the scope of delivery.
20
TSC 55 REB
14.4–2 x 18 V
2650–3800 rpm
2650–5200 rpm
-1° to 47°
0–55 mm
0–43 mm
160 x 2.2 x 20 mm
3.7 kg
5

Intended use

Cordless circular saws are designed for sawing
wood, materials similar to wood, plaster and
cement-bonded fibre materials and plastics.
When fitted with the special saw blades for alu­
minium that are offered by Festool, these ma­
chines can also be used for sawing aluminium.
Only use saw blades with the following dimen­
sions:
– Saw blade according to EN 847-1
– Saw blade diameter 160 mm
– cutting width 2,2 mm
– location hole 20 mm
– standard blade thickness max. 1,8 mm
– suitable for speeds of up to 9500 min
Never use machine with any abrasive wheels.
Only saw materials for which the saw blade in
question has been designed.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in­
tended use.
This power tool is suitable for use with
BP Festool battery packs of the same voltage
class.
6

Commissioning

6.1

Changing the battery pack

Removing the battery pack [2 A]
Inserting the battery pack [2 B]
Please note! Machine operation is on­
ly possible under the following condi­
tions [2 C]:
Both battery packs are used. Maximum power
with two battery packs (36 V).
Only the lower battery pack is used. Less power
with one battery pack (14.4 V/18 V).
6.2 Capacity display
The capacity display [1-12] automatically dis­
plays the charge state of the battery pack [1-6]
when the ON/OFF switch is actuated:
70 - 100 %
40 - 70 %
15 - 40 %
-1