Mounting The Deflector; Mounting The Cutting Attachment - Stihl FS-MM Notice D'emploi

English
Tighten down first screw firmly.
–
Tighten down second screw firmly.
–
10

Mounting the Deflector

Mount the wheel guard.
2 3
1
Attach the wheel guard to the
N
gearbox, while doing so, insert the
nose (1) into the recess (2) on the
wheel guard.
Turn-in and tighten the screw (3).
N
Mounting the Cutting
Attachment
Placing Power Tool on the Ground
Shut off the engine.
N
Turn the power tool so that the
N
cutting attachment mounting face is
pointing up.
Blocking the shaft
1
3
2
To mount and remove the cutting
attachments, the shaft (1) must be
blocked with the locking pin (2) or Allen
wrench (2). The parts are included in the
scope of delivery and are available as
special accessories.
2
FS-MM