Operating And Maintenance Information; General Operating And Maintenance Instructions; Topping Up Lubricant; Cleaning And Maintenance - Solo 69 00 150 Instructions D'emploi

Breaking up soil
Roughly remove any grass, weeds or other
plant material (for example with a
lawnmower).
For operation in hard soil it is advisable to
alternatively work the tool blades in a
forward and backward motion.
Always work on a small area until the
required depth is achieved.
Level off the cultivated area with a rake.
Working substances into the soil
Humus, compost, leaves or other organic
matter can be worked into the soil with the
cultivator attachment.
Evenly distribute the matter.
Cultivate the area by moving the blades in
alternate directions.
Level off the cultivated area with a rake.
Loosening soil in borders
Only loosen the top layer of the soil around
plants. Take care not to damage the plant
roots by cultivating too deeply.
Maintain a safe distance around trees and
bushes with more substantial roots.
Making furrows
Slowly pull the cultivator attachment through
the ground.
Work the soil more frequently for deeper
furrows.
8. Operating and maintenance
information
8.1 General operating and
maintenance instructions
After a running-in time of app. 5 hours, all
accessible screws and nuts (except the
carburettor adjusting screws) must be checked
for tightness and they must be retightened, if
required.
Application ; Operating and maintenance information

8.2 Topping up lubricant

Refill the gearbox with SOLO "Special gearbox
flow grease" (part no. 00831180) approx. Every
20 operating hours.
Fig. 4
Open screw (5) to replenish low-viscosity greace
for gears.

8.3 Cleaning and maintenance

Observe the safety instructions when cleaning
and maintaining.
Following operation ensure that the tool is clean
and free of soil. Never use cleaning solutions
containing solvents.
After cleaning treat the tilling blades with a
corrosion inhibitor.
Restrict access to the tool when in storage and
not being used. Keep away from children.
In the best interest of continued technological
progress we reserve the right to change the
design and configuration of any product
without prior notice.
For that reason, no claims can be accepted with
reference to text and illustrations in this manual.
ENGLISH 7