Proper And Intended Use; Technical Data And Emissions - Menzer ETS 150 5.0 Traduction De La Notice D'utilisation Originale

2. Proper and intended use
The MENZER random orbital sander ETS 150
is intended to be used for polishing and dry
sanding of wood, plastics, composites, paints
and varnishes, fillers (e.g. primed drywalling) and
similar materials. Special safety instructions
apply for mixed dusts with metal content (e.g.
lacquer processing in the automotive sector). The
power tool is not suitable for direct metal sanding.
The sanding of hazardous materials (e.g. paints
with lead content and asbestos or materials with
asbestos content) is extremely health-hazardous
and not permitted with this sander.
The use of abrasives for this machine is restricted
to MENZER abrasives suitable for operation at
3. Technical data and emissions
Dimensions/sanding parameters
Driving disc [mm]
Grinding stroke [mm]
Idling speed [rpm]
Dimensions [mm]
Weight [kg] (including cable 4m)
Voltage
Power consumption
Protection class
Sound pressure level (L
pA
Sound power level (L )
WA
Prediction (sound emission)
Vibration emission value
Prediction (vibration emission)
* Determined in accordance with testing condi-
tions set out in EN62841 with new, unused electri-
cal power tool. Values will change with regular use,
signs of wear and differing substrates, abrasives,
environmental conditions and insufficient main-
tenance.
The stated values were determined under labora-
tory conditions and are insufficient for a risk
assessment.
4 EN
)
10,000 rpm. The use of cutting or grinding discs, as
well as abrasive flap wheels, wire brushes or saw
blades is prohibited. Never mount the driving disc
without the appropriate distance ring.
We recommend using our MENZER dust extraction
units VC 760 and VC 790 PRO for dust removal.
Caution! The owner/operator is liable for
any improper use!
ETS 150 [ 5.0 ]
Ø 150
5,0
4.000–10.000
320 x 150 x 130
1,6
220–240 V ~ 50 Hz
350 W
/ I
*79 dB(A)
*90 dB(A)
K = 3 dB
*a ≤ 4,8 m/s²
h
K = 1,5 m/s²
The actual, applicable values at the relevant work
site and under relevant work conditions depend
on environmental conditions, work practices,
duration of continuous operation and the materi-
als used.
MENZER GmbH cannot be held responsible for
the use of these stated values instead of actual
emission values in any individually required risk
assessment.
ETS 150 [ 2.5 ]
Ø 150
2,5
4.000–10.000
320 x 150 x 130
1,6
220–240 V ~ 50 Hz
350 W
/ I
*79 dB(A)
*90 dB(A)
K = 3 dB
*a ≤ 4,8 m/s²
h
K = 1,5 m/s²