Manufacturer's Declaration; Wiesel Forceline - THOMSON WIESEL FORCELine Instructions De Montage Et De Maintenance

Mechanical Linear Drive Unit WIESEL FORCELine
11. Manufacturer´s Declaration
We Company
Street
Postcode, town
Declare herewith in our sole responsibility that the hereunder decribed product,
Designation
Type
To which the present declaration refers, complies with the following standards and standard documentation:
1. EG-Machinery Directive, Appendix
Basic safety and health requirements in the design and construction of machines
2. SS-EN 12100 sections 1 and 2
Safety of machinery, basic concepts, general design principles
The product mentioned above is intended for integration into a machine (in accordance with EG-Guideline
98/37/EG. Art. 1) . It may be put into operation only with a machine that is technically safe and complete and
that is marked with the CE sign.
The product mentioned above must not be put into service before the machinery into which it is to be incorpo-
rated fulfils all the required safety specifications, and especially all expressly prescribed safety measures accor-
ding to the EC Machine Directive.
We herewith confirm that the certification procedure was carried out solely in accordance with the Directive
98/37/EC of the European Parliament and the Council for the Harmonisation of Legal and Administrative
Regulations of the Member States for Machines dated 22 June 1998.
Tollo Linear AB
Box 9053,
SE291 09 Kristianstad, Sweden
Tel. +46 (0)44-24 67 00
Kristianstad May 12 2008
DECLARATION BY THE MANUFACTURER
As defined by EC Machinery Directive
Tollo Linear AB
Estridsv. 10
SE291 65 Kristianstad, Sweden
®
WIESEL ForceLine
MLSH 60 ZRT, MLSH 80 ZRT, MLSM 60 KGT, MLSM 80 KGT, MLSM 80 ZRT
®
Anders Trygg, Product Manager
39