Safety Notices In The Operating Instructions - THOMSON WIESEL FORCELine Instructions De Montage Et De Maintenance

Mechanical Linear Drive Unit WIESEL FORCELine

Safety notices in the operating instructions

This symbol indicates potential danger to
persons. Observe these notices to avoid
injury.
This symbol indicates potential danger to the
machine. Observe these notices to avoid
damage to the machine.
This symbol indicates special information
• for optimum use, or
• for easier operation of the machine.
®
WIESEL FORCELine MLSM 60/80 KGT
Fig. 1
Pos. Designation
1 Ball screw
2 Fixed bearing housing
3 Sealing strip
4 Scraper brush
5 Strip holder
6 Adapter
7 Sliding varriage
8 Bearing housing with movable bearing
®
2. Product description
®
WIESEL linear drive units are often used for the trans-
port and/or precise positioning of loads.
The program comprises the WIESEL FORCELine
with the types MLSM 60/80 KGT (ball-screw drive) and
MLSH 60/80 ZRT / MLSM 80 ZRT (toothed-belt drive).
The drive unit is normally an electric motor. The motor
may be mounted directly with a flange, or attached with
a parallel belt drive (only for MLS 60 Standard).
Depending on how the WIESEL
®
the FORCELine series series are combined, they can
cover a contiguous area, or be adapted to the available
space.
Pos.
Designation
9 Aluminium tubular section
10 Screw support
11 Ball ducts
12 Ball return carriage
13 Nut unit
14 Middle aluminium covering profile
15 Side scraper
®
series
®
linear drive units from
23