Explanation Of Symbols; Product Description; Scope Of Delivery - Conrad RTF MSP190 Notice D'emploi

Micro hélicoptère

Table des Matières

Les langues disponibles

Explanation of Symbols

The symbol with the exclamation mark points out particular dangers associated with handling, function or

operation.

The „arrow" symbol indicates special advice and operating information.

The ready-to-fly mini helicopter has a rotor head with a fixed angle of incidence for both main rotor blades that cannot

be adjusted. The raising and lowering of the helicopter is solely accomplished by changing the speed of the main

rotor.

The swash plate is controlled via two servos with two linkage points offset by 90°. Targeted yaw and tilting of the

swash plate permits continually recurring, direction-dependent (cyclic) blade adjustment that permits flying into a

specific direction. The rotor head is stabilised by a centrifugal weight rod that rotates along.

Stabilisation around the vertical axis (main rotor shaft) is handled by a tail rotor, which also has a stiff angle of attack

and is powered by a separate electric motor. Steering around the yaw axis is achieved by means of different revolu-

tions of the electric motor.

A central electronics PCB below the canopy contains all components that are required for control and steering of the

helicopter. The 2.4 GHz radio remote control installation included in the delivery allows a sensitive steering of the

model.

For operation, 6 mignon batteries (e.g. Conrad item no.: 652506, order 6x) are required.

• Electric helicopter ready to fly

• Radio remote control transmitter

• Flight battery

• USB charging cable

• Replacement main rotor blades

• Replacement tail propeller

• Replacement vertical tail

• Operating Instructions

Table des Matières

Table des Matières