Switching On The Transmitter - Conrad RTF MSP190 Notice D'emploi

b) Switching on the Transmitter
Move the control stick for the pitch and tail functions
(also see figure 1, item 8) to the bottom position right at
your body (see arrow on the right of the figure).
Slide the on/off switch (also see figure 1, item 6) from
the left position „OFF" to the right position „ON".
The LED indicator (also see figure 1, item 10) is lit red
and indicates that the transmitter is sufficiently supplied
with power.
Attention!
If the power supply is no longer sufficient for a faultless operation of the transmitter, the LED display flashes
red and the transmitter emits a short alarm at regular intervals (every 5 seconds).
In this case, terminate flight operation of the model immediately and insert a new set of batteries in the
transmitter.
Figure 3
37