FLUVO Bronze Notice D'utilisation page 18

The massage station can be planned individually with any number of wall and/or floor
nozzles. In this case the pump must be dimensioned specifically.
Should the massage station also be used as countercurrent swim unit we recommend
installing 1 wall nozzle and a fluvo pump.
The unit can be operated either by air pressure switching from the pool or by external swit-
ching, e.g. from the attendant's control panel
Multi-hole nozzles type forte are designed for a performance of 24 m³/h to 96 m³/h and con-
tains conically arranged injector chambers producing a flow with a high degree of air mixed
in for wide surface massage.
For suction at least two separate suction connections should be used. In addition, the re-
gulations issued by the German Swimming Baths Association in accordance with code of
practice 60.03 and DIN EN 13451-1 must be observed.
All water-conducting parts are of bronze/PVC. They are suitable for concrete-tile, concrete-
liner pools, pre-fabricated pools, concrete pools with brush-applied sealant and retro-fit-
ting.
5.2
18
BETRIEBSANLEITUNG / NOTICE D´UTILISATION / OPERATOR´S MANUAL
The jets can be arranged according to any re-
quirements.
see fig. 5.2
Recommendation for wall installation:
- lateral distance of the jets: s=1000 mm
- height displacement from jet to jet:
t=150 mm in each case
8010
Schmalenberger GmbH + Co.
D-72072 Tübingen / Germany
Massagestation Bronze
Version: 27111 - A