Operation; Accepting, Making And Ending A Call; Call Waiting - Volkswagen Touch Phone-Kit Mode D'emploi

000 051 473 A BA Touch Phone-Kit.fm Seite 19 Freitag, 27. Februar 2009 11:06 11
5

Operation

The hands-free device is operated by touching the appropriate buttons on the touchscreen ( Page 20)
or the voice control ( Page 21).

5.1 Accepting, making and ending a call

An incoming call is graphically indicated on the screen and acoustically by the hands-free device's ringing
tone coming from the vehicle's speakers. The telephone book entry is announced and displayed on the
screen if the caller is saved in the telephone book.
You can accept the call by pressing the
call can also be accepted or rejected using the Accept or Reject voice controls, if accept call is set to
Voice  More > Settings > Device > Accept call.
The volume can be increased by pressing the
the call. Press the pushbutton to go to access the following menu functions during the call:
Keypad
Private mode
Muting
Hold
Hang up an active call

5.2 Call waiting

With a call waiting, you can swap back and forth between two active calls or place both calls together
for a teleconference where the participants can all communicate with each other simultaneously.
An acoustic tone will sound if you receive another call during your current call. You can accept the call
by pressing the pushbutton or reject it by pressing the
If you accept the incoming call then the current call is switched over to call waiting and the waiting caller
will hear an announcement. The active participant is indicated by
enhanced functions with the call waiting function can be found in the following table.
Select More > Connect to connect the calls together for a teleconference. If you receive another call
during a conference you can add this call to your conference (Go to conference) or switch between the
conference and the call partner (Change). The enhanced functions available during the teleconference
can be found in the following table.
Note
●
The range of functions available during calls will vary as they depends on the mobile telephone
network and the mobile telephone.
●
The current mobile telephone network only permits a maximum of two lines to be used for the
teleconference function.
19
pushbutton or reject it by pressing the
button or decreased by pressing the
Calls up the keypad for replaying DTFM sounds. DTMF sounds are
required, for example, calling up a mailbox or an answering machine.
The hands-free function is deactivated and the call can be continued
using the mobile telephone. The active function is indicated by the
symbol.
The hands-free system's microphone is deactivated, e.g. so that you
can ask the passengers a question. The active function is indicated by
✓
the symbol.
Places the active call in a waiting loop.
Ends the current call.
pushbutton. The
pushbutton.
✓
displayed on the screen. The
button during
✓