Resetting The Telephone To The Factory Settings; Power Failure Operation - HumanTechnik FlashTEL comfort 3 Mode D'emploi

Resetting the telephone to the factory settings

Setting the telephone to the default settings
1. Press . "PHONEBOOK" will be shown in the display.
2. Use or
3. Press to enter the default menu.
"DEFAULT" and "CONFIRM?" will be shown in the display.
4. Press to confirm and the telephone will be set to the default settings.
Default settings:
One-touch dial keys:
Redial memory:
Calling number display memory (CLIP):
Telephone book:
Recall time:
Ring tone:
PIN code:

Power failure operation

Should there be a power failure, you can still use your telephone. However, the flashing light
will not work.
If you would like to use the display function during a power failure, you can put 4 batteries
(mignon or AA) into the telephone.
Note:
During a power failure, the telephone's flashing light will not work even if you can put in
batteries.
The dead-battery symbol
46 English
to page to "DEFAULT".
will appear in the display if the batteries are dead.
None
Empty
Empty
Empty
300 ms
1
0000