Calling Number Display; How It Works; Reading And Calling Entries; Storing An Entry - HumanTechnik FlashTEL comfort 3 Mode D'emploi

Calling number display

How it works

The number of the person calling you will appear in the telephone display. The telephone
supports both of the current systems (DTMF/ FSK). Your telephone will store the last 20 call-
ing numbers automatically. If the memory is full, the oldest entry will be deleted.
Important!
Calling number display will only work if this service is supported by your telecom
supplier. Please inquire with your telephone company.

Reading and calling entries

The last 20 telephone numbers recognized will be automatically stored in the telephone.
1. Press or
display.
2. Use or
number or a stored name will appear in the display. Additionally the date and the time
of the call record will be shown.
3. Once the desired telephone number appears in the display, lift the handset or press
the . The number you have selected will be dialed.
Note:
The handset must be resting on the cradle when you select the telephone number.

Storing an entry

1. Press or
display.
2. Use or
3. Press . "SAVE NUMBER" will be shown in the display.
4. Press again and enter the desired name of the telephone number on the keypad.
5. Press the corresponding key as frequently as necessary to select the desired letter (see
table on page 36). Press
6. Press to confirm your name entry and switch to the entry of the telephone number.
7. Enter the desired telephone number on the keypad. Press
entered.
8. Press to complete the programming process.
to enter the calling number display. The last entry will be shown in the
to page between the entries. The first 12 digits of the telephone
to enter the calling number display. The last entry will be shown in the
to page between the entries.
to delete the last letter entered.
to delete the last digit
English 39