Switching On The Machine And Selecting A Programme; Switching On The Machine; Changing A Programme - BORETTI BVW-682 Notice D'emploi

Switching on the machine and selecting a
programme

Switching on the machine

1
Machine is energized when the On/Off button is pressed, two dashes appear in the
program display and the end of program indicator turns on.
1. Press the Power On/Off key.
2. Select the program suiting your dishes via the Program Selection button.
3. If you prefer or wish to prefer, you can choose additional function.
4. Close door. The program starts automatically.
Note: If you decide not to start to machine after selecting the program, just press the on/off
button. Your machine will become ready for the new program selection when you press on/off
button again. You can select the new program by pressing the program selection button.
Program follow-up
Do not open the door
before the program ends.

Changing a programme

If you would like to change programs while a washing program is continuing.
Open the door and select a
new program by pressing the
program selection button.
Note: When the door of the machine is opened in order to stop the washing program before
it is completed first open the door slightly in order to avoid water spillage.
62
When you select a program with the program selection
button,the program you select ( P1, P2, etc) appears on
the program display and the end of program indicator
turns off.
End of program indicator on the control panel turns
on when the selected washing program is completed.
Your machine also gives a buzzer sound for "5 times"
when the program is completed.
After closing the door,
the new program started
will resume the course of
the old program.
salt
rinse aid
end
salt
rinse aid
end
salt
rinse aid
end
salt
rinse aid
end