Changing A Programme With Resetting; Switching The Machine Off - BORETTI BVW-682 Notice D'emploi

Changing a programme with resetting

If you would like to cancel a program while a washing program is resumed.
Open the door of your machine. The last selected
program will appear on the screen.
Keep the program selection button pressed for
3 seconds. End of program indicator flashes
and "1" is indicated on the program display.
Note: When the door of the machine is opened in order to stop the washing program before
it is completed first open the door slightly in order to avoid water spillage.

Switching the machine off

When end of program indicator turns on, switch your
machine off by using the Power On/Off button.
Note: After the buzzer sound which indicates the end of the program when the washing program
comes to an end (end indicator light is on), you can leave the door of your machine ajar in order
to hasten the drying.
Note: If the machine door opens during washing or the power is cut off, the machine will go on to
the program in case the door is shut or the power is back.
Discharge process starts after closing the door of the machine. The
machine discharges the water in it for about 30 seconds. When the
program is cancelled,your machine gives a buzzer sound for "5 times"
and the "end of program indicator" turns on.
Pull the plug out of the outlet. Turn off the water tap.
P1 P2 P3 P4 P5
P
salt
rinse aid
end
DE
EN
3h salt
6h rinse aid
9h end
63