Switching On The Machine And Selecting A Programme; Switching On The Machine; Programme Follow-Up; Changing A Programme - BORETTI BVW-652 Notice D'emploi

SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME

Switching on the machine

Note:If you decide not to start to machine after selecting the program , just press the on/off
Once the Power On/Off key
is pressed, the lamp Power
button.Your machine will become ready for the new program selection when you press on/off
Start/Pause is highlighted.
button again.You can select the new program by pressing the program selection button.
Program follow-up
Do not open the door before the program ends.

Changing a programme

If you would like to change programs while a washing program is continuing.
After closing the door , the
new program started will
resume the course of the old
program.
Note:When the door of the machine is opened in order to stop the washing program before
it is completed, first open the door slightly in order to avoid water spillage.

Changing a programme with resetting

When you select a program with the program
selection button, the light of the selected program
turns on and the end of program indicator turns off.
1. Press the Power On/Off key.
2. Select the program suiting your dishes via the Program Selection button.
3. Close door.The programme starts automatically.
Open the door and select a new
program by pressing the
program selection button.
End of program indicator on the control panel
turns on when the selected washing program is
completed .Your machine also gives a buzzer
sound for "5 times" when the program is
completed.
23
1. Press the Power On/Off key.