Testing Strip - BORETTI BVW-682 Notice D'emploi

Testing strip

The washing effectiveness of your machine de-
pends on the softness of the tap water. For
this reason, your machine is equipped with a
system that reduces the hardness in mains
water supply. The washing effectiveness will
Open the Run
testing water
strip. through
your tap
for 1
min.
Adjusting salt consumption
Table of Water Hardness Level Settings
Water German
hardness hardness hardness hardness
level dH
1 0-5
2 6-11
3 12-17
4 18-22
5 23-31
6 32-50
If the hardness of the water you use is above 90 dF (French hardness) or if you are using well
water; you are recommended to use fi lter and water refi nement devices.
NOTE: Hardness level is adjusted to level 3 as a factory setting.
Adjust the water softener according to how hard your tap water is.
Keep the Shake the
testing testing strip
strip in after taking it
water for out of water.
1
sec.
French Britisch
dF dE
0-9 0-6
10-20 7-14
21-30 15-21
31-40 22-28
41-55 29-39
56-90 40-63
increase when the system is correctly set. To
fi nd out the water hardness level of water in
your area, contact your local water board or
determine water hardness level by using the
test strip(if available).
Wait for Make your machine's water
1 min. hardness setting according to
the result obtained through the
testing strip.
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Hardness Level Indicator
L1 is seen on display
L2 is seen on display
L3 is seen on display
L4 is seen on display
L5 is seen on display
L6 is seen on display
No lime
Very low lime content
DE
Low lime content
Medium lime content
EN
Lime content
High lime content
47