Feature Description; Intended Use; Limitations On Use; Type-Identical Markings - Dräger Panorama Nova RP Notice D'utilisation

Feature description

The full face masks are facepieces with plug-in connectors (quick
connect couplings) for closed-circuit breathing apparatuses.
The full face masks can be used at temperatures from –30 °C to
+60 °C.
Mask spectacles can be inserted for users who wear spectacles.
Masks marked with a "T" have an adapter for the R 28 495 voice
transmission/receiver set. This has been tested and approved for use
in mining operations.
The full face masks are equipped with a wiper.

Intended use

The full face masks protect the face and eyes against aggressive
media.

Limitations on use

Beards and sideburns in the sealing area of the full face mask will
cause leakages! Therefore the full face mask should not be used by
anyone with facial hair of this sort. Earpieces in the sealing area also
cause leakages. Use special mask spectacles.
WARNING
(approved by Dekra Exam)
Approvals
The full face masks are approved according to:
— EN 136:1998 CL.3+
— TR CU 019/2011
— (EU) 2016/425
Declaration of conformity: see www.draeger.com/product-certificates
In addition, the full face masks comply with the requirements for
flame engulfment in EN 137.
The full face masks may only be used with approved closed-circuit
breathing apparatuses.

Type-identical markings

The full face masks are marked as follows:
Connector RP
T (telephone)
Mask body EPDM or SI
EN 136 CL. 3+
CExxxx (notified body in Europe)
Visor PC (uncoated)
9