Integrated Cleaning Programme - Melitta CAFFEO Guide D'utilisation

Integrated cleaning programme

The integrated cleaning programme removes residues including coffee oil residues
that cannot be eliminated by hand. It takes a total of approximately 15 minutes. The
cleaning symbol
For optimal cleaning results we recommend that you clean the brewing unit before-
hand (see page 64).
Caution!
– Run the integrated cleaning programme every 2 months or after appro-
ximately 200 brewed cups of coffee, at the latest however run the pro-
gramme when the symbol for cleaning
–
Only use the cleaning tabs from Melitta
These tabs are precisely matched to the Melitta
other cleaning agents can damage the appliance.
Please execute the integrated cleaning programme as follows:
Prerequisite: The appliance must be in stand-by mode.
1 Simultaneously press the button for single-cup dispensing
on/off button
→
The symbol for cleaning
illuminated.
2 Empty the drip tray and the coffee grounds container.
3 Re-insert the drip tray without the coffee grounds container and place the
coffee grounds container under the outlet.
→ First, two rinsing processes will be executed.
→
The symbol for the ground coffee chute
4 Open the lid of the ground coffee chute.
→
The symbol for the ground coffee chute
5 Introduce a cleaning tab into the ground coffee chute (Fig. G).
6 Close the lid of the ground coffee chute.
flashes during the entire process.
for longer than 2 seconds.
is flashing. The symbol for the drip tray
is illuminated in the display.
for automatic coffee makers.
®
CAFFEO
®
is illuminated.
is flashing.
. Use of
®
and the
is
65