Start Up; Setting Up - Melitta CAFFEO Guide D'utilisation

4 Start up

Prior to starting up the appliance please execute the following points. Execution of
the following points is described on the following pages.
•

Setting up

•
Connecting
• Filling the bean container
•
Inserting the Claris
•
Fill the water reservoir
• Switching on and venting
•
Adjusting the coffee quantity
•
Adjusting the brewing strength
When you have executed these points the appliance is ready for operation. You can
make coffee. We recommend pouring the first two cups of coffee after first start up
down the drain.
Setting up
•
Place the appliance on a stable, level, and dry surface. Ensure that there is
a distance of 10 cm to the wall and to other objects.
Caution!
–
Never place the appliance on hot surfaces or in wet areas.
–
Do not transport or store the appliance in cold vehicles or rooms with
low temperature because the residual moisture could freeze and damage
the appliance. Follow the instructions on page 70.
• The coffee grounds container is located in the drip tray. Please ensure that
the drip tray is pushed into the appliance all the way to the stop.
® water filter
47