AERMEC FCL 32 Manuel D'installation page 21

USE (MODULE 600)
GLL10
In heating functioning mode, a louvered fin opening of 20° is
recommended, indicated with a raised line on the louvered fins (see
figure). In cooling functioning mode, a louvered fin opening of 10° is
recommended, indicated with a raised line on the louvered fins (see
figure). Ventilation is allowed with the louvered fins closed.
Position of the louvered fins in heating mode
20° opening
Position of the louvered fins in cooling mode
10° opening
Ventilation is allowed with the louvered fins closed.
USE (MODULE 840)
Complete louvered fin opening is
recommended in heating functioning
mode (see figure).
20
20°
10°
In cooling functioning mode louvered
fin opening of 50% is recommended
(see figure).
Position of the louvered fins in heating mode
Position of the louvered fins in cooling mode
Ventilation is allowed with the louvered fins closed.
IFCLIJ 1805 - 4528500_09
GLF10
For maximum efficiency of the grill accessory both in heating and
cooling it is necessary the maximum opening of the fins
With the flaps closed, ventilation is allowed..
Position of the fins in heating
/ cooling operation
maximum opening
With the flaps closed,
ventilation is allowed
Ventilation is allowed with the louve-
red fins closed.
completely open
half-way opening
20°
10°