Solo 445 Instructions D'emploi page 20

Shutting off the Engine
Move the throttle lever or the speed lever to
idling / 'min' position. Move ignition switch to
"off" position until engine stops.
Adjustment of Carrying Straps
9
Put blower on back and secure carrying straps
with quick-coupling locks (ill. 1.13).
The shoulder straps can be adjusted to the
required length with lock slides. The straps
are tightened by pulling downwards on the
strap ends (9.A) and reverse in (9.B).
Note: Adjust the carrying straps in such a way
that the back plate of the blower rests
securely against the back of the operator.
Operating Hints
• Prior to operating and prior to each start,
check the blower unit's condition with
regard to throttle activation, on/off switch,
protective covers, carrying straps and also for
any fuel leaks.
• Prior to starting the engine and during all
jobs, the operator needs to be securely and
safely positioned.
• When starting the engine, always move at
least 3 metres away from the re-fueling area.
Carburetor Adjustment Data
The following instructions are intended for
Service Personnel!
Idling Speed:
Maximum Admissible Speed
Caution! Do not set engine speed
higher than recommended. Excess
speed will lead to engine damage!
20
1
=2800 /min. (R.P.M.)
1
= 6300 /min. (R.P.M.)