Assembling The Valve System With The Bus Coupler - Aventics HF03 LG Série Mode D'emploi

AVENTICS | CANopen, CANopen sb | R412009415–BDL–001–AE
Fig. 3: Dimensioned drawing of the valve system (bus coupler and valves)
6 Assembly
6.1 Assembling the valve system with
the bus coupler
You will receive your individually configured valve system
completely fitted with all components:
W
Valve terminal
W
Bus coupler
The operating instructions accompanying the VS describe
in full how to assemble the entire valve system. Any
mounting orientation may be used with the VS. The
dimensions of the complete VS vary according to module
equipment (see Fig. 3).
6.1.1
A + 33
B + 33
33 9
Dimensions A and B depend on the valve block used.
Dimensions
73
Assembly