John Bean T7300 Manuel D'utilisation page 12

P/N: EAL0424G33A
12
Safety
EAL0413G11A
Instructions on lifter maximum loading capacity.
The wheel weight must be known.
• The plate indicates the lifter loading capacity.
• The mechanical parts of the lifter can be compromised
by excessive loads.
• For particularly heavy wheels, we recommend identifying
the exact weight, with a suitable instrument, before lifting.
Do not use the wheel lifter if the weight exceeds the
maximum allowed weight.
• Remain at a safe distance when they are moving.
COMPLY WITH THE LOADING CAPACITY OF THE
LIFTER.
EAL0413G12A
Indication of the hooking point for lifting and handling
the equipment.
• The plate indicates the lifting point prepared by the
manufacturer.
• Use lifting straps, with load capacity suitable to the weight
of the equipment (500 kg min.).
• Use lifting slings in polyester provided with identification
plate.
• Be careful not to place the straps on sharp edges.
• Remain at a safe distance when the equipment is moving.
• Do not remain or pass under suspended loads.
FOLLOW THE INSTRUCTIONS SUPPLIED ABOUT
HOW TO HANDLE THE EQUIPMENT.
EAL0424G33A
(symbol on Danger Plate)
Indication to refer to the documentation.
• Refer to the Operator's Manual to understand the symbols
on the plate and the areas of the equipment they refer to.
• The supplied documentation is essential for proper
machine Use and Maintenance.
• In case of doubts or uncertainties, stop the operations
and read the specific manuals.
• The part numbers of the documents supplied with the
machine are indicated on page 2 of this Manual. Request
a copy of the documents if they should prove unreadable.
READ AND UNDERSTAND THE INDICATIONS
PROVIDED IN THE DOCUMENTATION BEFORE
PERFORMING ANY OPERATION.
IMPORTANT!! KEEP THESE
INSTRUCTIONS