Table Des Matières - Titan THERMOMARK 300 Série Mode D'emploi

THERMOMARK
ORIGINAL OPERATING MANUAL
1 SAFETY PRECAUTIONS ___________________ 4
1.1 Explanation of symbols used _____________________4
1.2 Safety hazards ________________________________4
2 INTRODUCTION _________________________ 6
2.1 Instruction manual _____________________________6
2.2 Machine design _______________________________6
2.3 Machine maintenance __________________________6
2.4 Notes regarding applicable materials ______________6
3 DESCRIPTION OF UNIT ___________________ 8
3.1 Before getting started __________________________8
3.2 Machine function ______________________________8
3.3 General precautions____________________________9
3.4 System diagram ______________________________10
3.5 System controls ______________________________12
3.6 Technical data _______________________________13
4 SYSTEM PREPARATION __________________ 14
4.1 Applicator die setup __________________________14
4.2 Bead system features, adjustment and operation ___15
4.3 Closed die bead application ____________________15
4.4 Getting comfortable __________________________16
5 OPERATION ____________________________ 17
5.1 Lighting the applicator ________________________17
5.2 Burner flame _________________________________18
5.3 Lighting the re-verber-ray burners _______________18
5.4 Applying material ____________________________19
6 SHUTDOWN, CLEANING AND
MAINTENANCE _________________________ 20
6.1 Shutdown, cleaning ___________________________20
6.2 Lubrication __________________________________20
6.3 Application die care and maintenance ____________21
6.4 Infrared burner service data ____________________21
6.5 Infrared burner repair and maintenance __________22
6.6 Burner control and gas system service data ________23
7 TROUBLESHOOTING ____________________ 24
8 TITAN ASE TERMS AND CONDITIONS______ 25
ACCESSORIES AND SPARE PARTS _____________ 74
Spare parts list for the main assembly (underside) _____ 74/75
Spare parts list for the die assembly ________________ 76/77
Spare parts list for the thermostat assembly ____________78
Spare parts list for the agitator assembly _______________79
Spare parts list for the melting pot assembly ____________80
Spare parts list for the delivery system _________________81
Spare parts list for the die shield assembly ______________82
Spare parts list for the right side handles _______________83
Spare parts list for the handle assembly _____________ 84/85
Spare parts list for the push handle assembly ___________86
Spare parts list for the agitator handle assembly _________87
Spare parts list for the burner assembly ________________88
Spare parts list for the pointer assembly ________________89
Spare parts list for the pilot assembly __________________90
WARRANTY _________________________________ 91
CONTENTS
3