Menzer LHS 225 PRO Mode D'emploi page 15

MENZER LHS 225 PRO
LONG-NECK SANDER
Original instructions
Dear customer,
Milý zákazníku,
By purchasing the MENZER LHS 225 PRO Long-Neck Sander you have selected a product of the highest
quality. We would hereby like to express our gratitude for the trust you have shown in us and our tools.
tions on the following pages. Close observance of the instructions given here will ensure an optimal result
for your work. The safety warnings are intended to protect you from accidents that could be caused by
improper use of the long-neck sander.
The MENZER Team
SEZNAM TABLE OF CONTENTS
and the storage and application instructions described here. The operator of this machine uses it at his
1. 1. or her own risk and assumes full responsibility for doing so. These instructions should be kept and used TECHNICAL SPECIFICATIONS TECHNICKÉ ÚDAJE
for future reference.
2. SAFETY INSTRUCTIONS
2.1 Instructions for power safety
1. TECHNICAL SPECIFICATIONS
2.2 Safety in your working environment
2.3 Operating safety tips
Model: MENZER LHS 225 PRO
3. Voltage: OPERATING THE MACHINE 230 V ~ 50 Hz / 110 V ~ 50 Hz
3.1 Power consumption: 550 W Starting off
3.2 Operating the machine
Driving disc: 3.2.1 Connecting a vacuum cleaner Ø 225 mm
3.2.2 Weight: Operating the long-neck sander 3.6 kg
3.2.3 Sanding walls and ceilings
3.2.4 Changing the sanding disc
2. SAFETY INSTRUCTIONS
4. STORAGE
The MENZER LHS 225 PRO Long-Neck Sander is designed for renovation works and is suitable for the
- 5. MAINTENANCE
5.1 Troubleshooting
- working environment. 5.2 Replacing the driving disc
5.3 Replacing the sanding head housing and the brush rim
5.4 Replacing carbon brushes
2.1 INSTRUCTIONS FOR POWER SAFETY
6. MACHINE DETAILS
This machine may ONLY be connected to sockets that provide the operating voltage displayed on the ma-
7. CE DECLARATION
8. TERMS OF GUARANTEE
poses the risk of an electric shock for the operator.
since this could cause damage to the cable's insulation. Never attempt to make alterations to the plug con-
nector or other machine parts that have electrical contact.
to prevent voltage drop or overheating.
Do not use the power cable as a means of carrying or hanging the long-neck sander. Do not pull on the
cable when you wish to disconnect the sander from the power supply. Keep the cable away from sharp
use the sander when there are signs of damage to the cable.
2.2 SAFETY IN YOUR WORKING ENVIRONMENT
Ensure that your place of work is always well-ventilated and well-lit so as to avoid potential accidents. In
Verze 1.3 Version 1.3
CZ 3 EN 3
EN 3
EN 3
EN 3
EN 4
EN 5
EN 5
EN 5
-1
EN 5
EN 5
EN 6
EN 6
EN 6
EN 6
EN 7
EN 7
EN 7
EN 7
EN 8
EN 10
EN 11
-
EN 3