Electrical Installation; Safety Instructions Relating To Installation; Clothing Precautions; Regulations - SOMFY DEXXO SMART io Manuel D'installation

Masquer les pouces Voir aussi pour DEXXO SMART io:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
Figure 1 - Mechanical protection
Figure 2 - Safety distances

1.5. Electrical installation

DANGER
The installation of the power supply must comply with
the standards in force in the country in which the drive is
installed, and must be carried out by qualified personnel.
The electric line must be exclusively reserved for the
drive and equipped with protection, comprising:
• a 10 A fuse or breaker,
• a differential type device (30 mA).
An all-pole power supply cut-off device must be provid-
ed.
It is recommended that you fit a lightning conductor
(maximum residual voltage 2 kV).
Cable run
Underground cables must be equipped with a protective
sheath with a sufficient diameter to contain the motor cable
and the accessories cables.
For overground cables, use a cable grommet that will with-
stand the weight of vehicles (ref. 2400484).

1.6. Safety instructions relating to installation

WARNING
Before installing the drive, remove any unnecessary
cords or chains and deactivate any locking device (bolt)
which is not required for motorised operation.
DANGER
Do not connect the drive to a power source before instal-
lation is complete.
3
WARNING
Modifying any of the components in this kit or using ad-
ditional components not recommended in this manual is
strictly prohibited.
Monitor the door as it moves and keep people away from it
until installation is complete.
Do not use adhesive to mount the drive.
Install the internal manual back release device at a height of
less than 1.8 m.
Permanently affix the label concerning the manual back re-
lease device near to its mobile component.
WARNING
Take care when using the manual back release device as
an open door can suddenly fall off if the springs are weak,
broken, or incorrectly balanced.
NB
Install any fixed control device at a height of less than 1.5 m
and within sight of the door, but away from moving parts.
A er installation, ensure that:
• the mechanism is correctly set
• the manual back release device is operating correctly
• the drive changes direction when the door encounters an
object 50 mm high on the ground.

Clothing precautions

Take off any jewellery (bracelet, chain, etc.) during installation.
For manoeuvring, drilling and welding operations, wear ap-
propriate protection (special glasses, gloves, ear protection,
etc.).

1.7. Regulations

Somfy declares that, when used in accordance with these in-
structions, the product described in these instructions com-
plies with the essential requirements of the applicable Euro-
pean directives, and in particular Machinery Directive 2006/42/
EC and Radio Equipment Directive 2014/53/EU.
The full text of the EC declaration of conformity is available at
the following website: www.somfy.com/ce.
Philippe Geoffroy, Head of Regulations, Cluses

1.8. Assistance

You may encounter difficulties or have questions when install-
ing your drive.
Do not hesitate to contact us; our specialists are on hand to
answer all your questions.
Internet: www.somfy.com
DEXXO SMART io
Copyright
©
2018 SOMFY ACTIVITES SA. All rights reserved.

Publicité

Table des Matières
loading

Table des Matières