Frequently Asked Questions - Lumie Bobyclock ACTIVE 250 Notice D'utilisation

BCAci1010:Layout 1 27/10/10
English

Frequently asked questions

I tried out the sunrise but the light comes up really quickly;
what's wrong?
You probably didn't allow enough time for a full sunrise. For example,
the default sunrise takes 30 minutes so if the clock shows the time
as 11.00 then you need to set the wake-up time to at least 11.30.
What happens when I unplug my Bodyclock Active or there's a
power cut?
Your Lumie Bodyclock Active keeps time for one hour; other
settings are permanent, so you won't need to reprogram the unit,
just plug it back in. If you need to adjust the time, see
The display panel is too bright when I'm trying to sleep; how
can I change it?
See Display brightness for auto-dimming options.
What can I do if the display is working but the light doesn't
come on?
Check to make sure the bulb is firmly screwed into the socket. If this
doesn't work, replace the bulb.
Why is nothing happening when I press the buttons?
You may have accidently set the unit to demonstration mode (only
useful for shops, exhibitions etc!) so try pressing + for 12 seconds. If
that doesn't work or if the display shows
restore the default factory settings?
16 | www.lumie.com
16:03 Page 16
Basic set-up.
RESET
, see How do I
English
How do I restore the default factory settings?
Turn off the power at the mains. Press and hold E as you turn the
power back on. Release the button when the software version
number shows.
What can I do if neither the display nor light are working?
A fuse may have blown. With the unit unplugged, try replacing the
3A fuse in the plug or the 2A fuse in the unit; simply unscrew the
black fuse holder underneath.
Please contact Lumie if you need a replacement bulb or if you still
have a problem with your Bodyclock Active.
www.lumie.com | 17