Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Frequently asked questions
What happens when I unplug my Bodyclock Go or there's a
power cut?
Your Bodyclock Go keeps time for one hour; other settings are
permanent, so you won't need to reprogram the unit, just plug it
back in. If you need to adjust the time, see
The display panel is too bright when I'm trying to sleep; how
can I change it?
Display brightness
See
for auto-dimming options.
What can I do if the display is working but the light doesn't
come on?
Check to make sure the bulb is firmly screwed into the socket. If this
doesn't work, replace the bulb.
How do I restore the default factory settings?
Turn off the power at the mains. Press and hold E as you turn the
power back on. Release the button when the software version
number shows.
What can I do if neither the display nor light are working?
A fuse may have blown. With the unit unplugged, try replacing
the 3A fuse in the plug.
Please contact Lumie if you need a replacement bulb or if you still
have a problem with your Bodyclock Go.
12
|
www.lumie.com
Clock and alarm time.
English
Warranty
This unit is covered under warranty against any manufacturing
defect for 24 months from the date of purchase. This is in addition
to your statutory rights. If you are returning the unit for service,
please use original packaging if possible, including internal pieces.
Make sure that the mains plug is prevented from moving in transit
and damaging the unit. If the unit is received damaged, then we
may have to charge to put it right. Please contact Lumie for advice
before sending the unit back.
Technical specification
Subject to change without notice.
Lumie Bodyclock Go 75
230Vac, 50Hz, 50W
Halogen bulb E14 42W
Operating temperature: 0°C – 35°C
Class I Medical Device
www.lumie.com
|
13
Publicité
Table des Matières
