Lumie Bobyclock ACTIVE 250 Notice D'utilisation page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

BCAci1010:Layout 1
27/10/10
English
WHITE NOISE
is a low-pitched interference sound, ideal for
masking out other noises. When you activate your wake-up sunrise,
A shows and
WAKE SOUND
Press E to set your sound option; set the wake-up volume by
pressing - or +.
To set, press E or wait 12 seconds.
Radio
If you choose
WAKE RADIO
prompted to choose an FM radio station by pressing - (to tune
down) or + (to tune up).
Press E and the volume bar shows.
Select your wake-up volume by pressing - or + .
To set, press E or wait 12 seconds.
You'll wake to your sunrise and preferred radio station at the set
volume. When you activate your wake-up sunrise, A shows and
WAKE RADIO
briefly shows.
Light
WAKE LIGHT
If you select
any sounds. When you activate your wake-up sunrise, A shows and
WAKE LIGHT
briefly shows.
Flash
WAKE FLASH
Selecting
gives you a sunrise followed by the light
flashing on and off at the wake-up time. When you activate your
wake-up sunrise, A shows and
Display brightness
You can set the brightness of the display panel to automatically dim
to minimise sleep disturbance. When you activate your wake-up
12
|
www.lumie.com
16:03
Page 12
then
WHITE NOISE
briefly show.
as your wake-up option, you are
you'll wake to a simple sunrise without
WAKE FLASH
briefly shows.
English
sunrise before going to sleep this feature is also activated (see also
Waking up without a
sunrise).
Press and hold E until
SET WAKEUP TIME
shows. Press - or + to scroll
DISPLAY AUTO
repeatedly until e.g.
through and select an auto-dimming option:
DISPLAY AUTO
causes the display panel to dim to a low level
when the light is low or off. The display reverts to normal brightness
during the wake-up sunrise.
DISPLAY HIGH
keeps the display panel at its brightest setting
without dimming at all.
DISPLAY AUTO OFF
causes the display panel to dim to a low
level then finally off when the light is low or off. The display reverts
to normal brightness during the wake-up sunrise.
To set, press E or wait 12 seconds.
Tip: If you need to see the time when the display is dim or off, press + to
light the display panel. After 12 seconds it reverts to its previous low level.
Sunrise
The shortest sunrise takes only 15 minutes and the longest lasts 90
minutes and all reach full brightness at your chosen wake-up time.
For example, if your wake-up time is set for 7:00am and you choose
SUNRISE 30
, the sunrise starts at 6:30am and gets to maximum
brightness at 7:00am. Any extra alarms are at the end of the sunrise
at your chosen wake-up time.
Press and hold E until
SET WAKEUP TIME
SUNRISE 30
repeatedly until e.g.
shows.
Press - or + to scroll through
SUNRISE 15
SUNRISE 30
SUNRISE 60
, SUNRISE 45,
minutes and select a sunrise duration.
To set, press E or wait 12 seconds.
shows, then press E
shows, then press E
SUNRISE 20
,
,
SUNRISE 90
and
www.lumie.com
|
13

Publicité

Table des Matières
loading

Table des Matières