Introduction; Product Presentation; Main Technical Characteristics - sylvac D70A Manuel D'utilisation

2. Introduction

2.1. Product presentation

The display Unit D70A allows making dimensional control using 1 or 2 air gages. (air plug gauge,
air caliper gauge, ring, crutch...).
Depending on the version it is possible to perform simple measurement (with one air gage),
or it is also possible to display 2 characteristics on the screen and can make static measurement
or dynamic (Min, Max et...)
Measurements can be made by comparison with a reference part: calibration master.
Thanks to the many user-programmable functions, the D70A fits into many control applications.
The display Unit D70A can be connected to a PC thanks to its RS232 or USB connection that can
export the measurement on to a CSV files via a USB key.
A footswitch can be connected in order to transfer measurement.
2.2. Versions
D70A - 1 input D70A - 2 inputs
1 input for air gage 2 inputs for air gage
2.3. Characteristics

2.3.1. Main technical characteristics

• TFT colour touch screen display 4,3'', resolution 480x272.
• Static or dynamic measurements (Max, Min, Max-Min, Average, Median)
• Analogue or digital display
• 1 or 2 measurement configurations (2 characteristics)
• Possibility to select automatically the characteristic by using the air gage or by touching the
screen.
• Relative or absolute display
• Display resolution (up to 0.1μm)
• Metric (mm or μm) or Imperial (Inches) measurement
• RS232 port for communication with a PC
• USB port for communication and/or power supply
40