1.4. Introduction of preset value keys
Press
Press
+/- must be done in the first digit of the display. (left)
To memorize the value, press the preset key.
* maximum value of preset : +/- 400mm/15''
1.5. FCT key
Function Cha 1
Basic function : The unit display the value of probe n :1
Function Cha 2
Quick pressure : The unit display the value of probe n :1
Function Cha 1-2
Quick pressure : The unit display the value of probes n :1-2 (differential)
Fonction Cha 1+2
Quick pressure : The unit display the value of probes n :1 +2 (sum)
* The display parameters (unit, resolution, etc..) are inde-
pendent for Cha 1 and Cha 2. The functions differential and
sum use the parameters of Cha 1.
1.6. Keyboard locking keys
Long pressure : ~4 s. on one of these keys locks it's function and
display « Loc on ».
To unlock this locked function, press the key until the display
show « Loc oFF »
See also General keyboard unlocking in chapter Setup of the unit.
See also General keyboard unlocking with KEY Remote command.
move the selection of a digit from left to right.
change the digit from 1 to 9. The selection of the sign
7
E