sylvac D70A Manuel D'utilisation page 58

6.4. Configuration
After pressing the icon «
This window allows configuring the general communication settings of your D70A.
Footswitch function
•
- « Preset » Calibration
•
- « transfert » : send the measurement to the RS232 or USB
•
- « part » : change the active part (part 1 / part 2)
•
- « Init Dyn » : start dynamic measurement (min, max...)
•
- « zéro » : Set the displayed value at zero
If you select transfer-->keyboard, the D70A will be detected as a keyboard when connected to
a computer, without installing a specific driver or software.
Then when you transfer the measure (with screen, IO or footswitch), the displayed value will
appear on your PC when your cursor is. (for example on an Excel cell), in the same way than
you would have typed with your standard keyboard.
If you select transfer-->USB Stick, a "sylvac.csv" file will be created on the connected USB
stick, and each time you press the "Print" button of the measuring screen, a line will be added
on the file.
configuration », the windows below appears.
If the optional I/O module has been
connected, it will be identified here
after pressing the « Id » button.
58
Choice of the
transfer
mode : RS232,
Keyboard or USB
Stick
Language
selection. Other
languages can be
installed on
demand.