sylvac D70A Manuel D'utilisation page 60

7.1. Lateral button functions
Absolute or relative mode allows to make a « zéro » at a defined position.
If the relative mode is selected, the button become red
To come back to the absolute mode, press on the « clear » button
Start dynamic mea-
surement (Min,
Max...) clear the
zero function.
Calibration/Preset.
After pressing this
button, the dis-
played value will
take the master
value.
7.2. Choice of the needle indicator style
If the D70A is configured with the needle indicator (mode Galva), it is possible to change manually
the type of scale.
Automatic
The automatic needle scale adapts automatically with the part tolerances.
The manual needle has fixed scales and allows to use the +/- option (see chapter «display»)
Manual
60
Measurement
transfert
(RS232 or USB)
Change manually
the active part (part
1 or part 2)
Go to the icon
desktop