sylvac D70A Manuel D'utilisation page 61

You can change the scale type by touching the area as on the below picture :
E
7.3. Temporary dynamic mode
The characteristic is defined either as « static » (direct) or « dynamic » (Max, Min ...) If a charac-
teristic has been adjusted as static, it is nevertheless possible to change temporarily to a dynamic
mode, directly from the measuring screen.
To change the measuring mode, press on the icon as shown on the above picture.
In order :
Static measurement Max Min Max-Min Average Median
When a dynamic mode has been selected, press on the button or on the footswitch (if con-
figured as « init dyn » (see chapter «Configuration») to start recording.
61