Husqvarna 120 Mark II Manuel D'utilisation page 9

• Keep control of the product during the
cut and after the wood falls to the
ground. Do not let the weight of the
product drop down after the cut is made.
• Make sure that the area in which you
are cutting is free from blockage. Do not
let the nose of the guide bar touch a log,
branch or other blockages while you
operate the product.
• Cut at high engine speeds.
• Do not overreach or cut above shoulder
height.
• Obey the manufacturer's sharpening
and maintenance instructions for the
saw chain.
• Only use replacement guide bars and
saw chains specified by the
manufacturer.
• The risk of kickback is increased if the
depth gauge setting is too large.
Personal protective equipment
• Always use the correct personal
protective equipment when you operate
the product. The personal protective
equipment does not erase the risk of
injury. The personal protective
654 - 006 - 10.02.2020
equipment decreases the grade of injury
if an accident occurs.
• Generally, clothes should be close-fitting
without restricting your freedom of
movement.
• Use an approved protective helmet.
• Always use approved ear protection
while you operate the product. Noise for
a long period can cause hearing loss.
• Use protective glasses or a face visor to
reduce the risk of injury from thrown
objects. The product is capable of
throwing objects, such as wood chips,
small pieces of wood, etc., at great
force. This can result in serious injury,
especially to the eyes.
• Use gloves with chainsaw protection.
• Use trousers with chainsaw protection.
• Use boots with chainsaw protection,
steel toe-cap and non-slip sole.
• Make sure that you have a first aid kit
near.
• Sparks can come from the muffler, the
guide bar and saw chain or other
sources. Always have fire extinguishing
tools and a shovel available to help
prevent forest fires.
Protective devices on the product
• Make sure that you regularly do the
maintenance to the product.
• The life of the product increases.
• The risk of accidents decreases.
Let an approved dealer or an approved
service center regularly examine the
product to do adjustments or repairs.
• Do not use a product with damaged
protective equipment. If the product is
damaged, speak to an approved service
center.
Stop switch
Start the engine. Make sure that the engine
stops when you move the stop switch to
the stop position.
9