Safety Instructions For Maintenance; Assembly - Husqvarna 120 Mark II Manuel D'utilisation

• Only use approved containers when you
move the fuel or put the fuel into
storage.
• Empty the fuel tank before long-term
storage. Obey the local law on where to
dispose fuel.
• Clean the product before long-term
storage.
• Remove the spark plug cable before you
put the product into storage to make
sure that the engine does not start
accidentally.

Safety instructions for maintenance

• Disconnect the spark plug before doing
maintenance on the product, not
including carburetor adjustments.
• Have all product servicing done by an
approved dealer, not including the tasks
Maintenance on page 20 .
in
• Make sure the saw chain stops moving
when the throttle trigger is released.
• Keep the handles dry, clean, and free
from oil or fuel mixture.
• Keep caps and fasteners correctly
tightened.
• Replacement components that are not
approved or the removal of safety
devices can cause damage to the
product. This can also cause possible
injury to the operator or bystanders.
WARNING:
understand the safety chapter
before you assemble the product.
To assemble the guide bar and saw
chain
1. Remove the spark plug cap from the
spark plug during assembly to prevent
an accidental start.
654 - 006 - 10.02.2020

Assembly

Read and
Only use accessories and replacement
parts as recommended. Do not change
your product.
• Keep the saw chain sharp and clean for
safe and high performance.
• Obey the instructions for lubricating and
changing accessories.
• Examine the product for damaged parts.
Before more use of the product, make
sure the damaged guard or part
operates correctly. Examine for broken
or incorrectly aligned parts, and parts
that do not move freely. Examine for
other conditions that can have an effect
on the operation of the product. Make
sure the product is correctly installed. A
guard or other damaged part must be
repaired or replaced by an approved
dealer unless written in the operator's
manual.
• When not in operation, keep the product
in a dry, high or locked area away from
children.
• During transportation or storage of the
product, use a transportation guard or
case to move the product.
• Do not use waste oil. Waste oil can be
dangerous to you and can cause
damage to the product and
environment.
11