Rohm CAPTIS-M Traduction Du Manuel D'utilisation Original page 71

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Flange pursuant to DIN-ISO702-1
Flange pursuant to DIN-ISO702-4
4.
Screw the flange to the machine spindle with the fixing screws. For
tightening torque, see Chapter 3.2 Technical Specifications, page 62.
5.
Place the collet chuck CAPTIS-M on the flange in the correct position
and tighten slightly with the fixing screws.
6.
Check radial and axial run-out on the check collar of the chuck and align
if necessary.
7.
Firmly tighten the fixing screws. For tightening torque, see Chapter 3.2
Technical Specifications, page 62.
Flange mounted.
122017 / 1.0
Assembly
69

Publicité

Table des Matières
loading

Table des Matières