Assembly - Rohm CAPTIS-M Traduction Du Manuel D'utilisation Original

5

Assembly

On assembly, observe Chapter 8.4 Fixing and Replacing Screws, page 91.
122017 / 1.0
Warning
Crushing injuries due to insufficient securing on
assembly, incorrect tightening torque of the screws.
Crushing due to falling of the collet chuck CAPTIS-M.
 Use tapped holes for transport purposes.
 Wear personal protective equipment.
Observe tightening torque of the screws.

Warning
Crushing injuries and cuts due to start-up during set-up
work.
Flying parts may cause serious injuries.
 Assembly and replacement of parts only in set-up
mode.
 Limit speed in set-up mode.
 Ensure that the machine cannot be put into operation
unsupervised.
 No rotation without workpiece.
Wear personal protective equipment.

Risk of burns due to hot surfaces.
Burns on hands.
Do not touch the collet chuck CAPTIS-M when in

operation.
 Allow the collet chuck CAPTIS-M to cool down before
carrying out necessary work.
 Wear personal protective equipment.
Caution
Assembly
67