Specifications; Proper Use Of The Product; Scope Of Delivery - APA 16619 Manuel De L'opérateur

Lithium microprocessor battery charger,
6 V/12 V, 5 A with cable roller
CONTENT
1.

PROPER USE OF THE PRODUCT ____________ 7

2. SCOPE OF DELIVERY ___________________ 7
3. SPECIFICATIONS _____________________ 7
4. EXPLANATION OF SYMBOLS ______________ 8
5. SAFETY NOTES ______________________ 8
6. OPERATING INSTRUCTIONS ______________ 9
6.1 OVERVIEW ________________________ 9
6.2 USING THE ADAPTER CHARGING CABLE _______ 9
6.3 PREPARATION ______________________ 9
6.4 CONNECTING THE BATTERY CHARGER ________ 9
6.4.1 CONNECTING THE ADAPTER CHARGING CABLE _
WITH POLE CALLIPERS _________________ 9
6.4.2 CONNECTING THE ADAPTER CHARGING CABLE _
WITH EYES _______________________ 9
6.5 CHARGING THE BATTERY _______________ 10
6.5.1 SELECTING THE CHARGING PROGRAMME_____ 10
6.6 REMOVING THE CHARGER ______________ 11
7. MAINTENANCE AND CARE ______________ 11
7.1 MAINTENANCE _____________________ 11
7.2 CARE ___________________________ 11
8. NOTES REGARDING ENVIRONMENTAL PROTECTION 11
9. CONTACT INFORMATION _______________ 11
WARNING
Read the operating instructions through
carefully prior to initial use and observe
all of the safety notes! Not observing such
may lead to personal injury, damages to
the device or your property! Store the ori-
ginal packaging, the receipt and these in-
structions so that they may be consulted
at a later date! Prior to initial use check
the contents of the packaging to ensure
that they are in perfect condition and
complete!
1. PROPER USE OF THE PRODUCT
The charger is designed for charging lithium iron phosphate
batteries (LiFePO4) and has a correspondingly specialised
charging programme.
The charger is suitable for charging open and a variety of
closed, maintenance-free lead-acid batteries, for example:
• Wet batteries (WET), lead-acid batteries (fl uid electrolyte)
• Gel batteries (gel electrolyte)
• AGM batteries (electrolyte in fi breglass fl eece)
• Maintenance-free lead-acid batteries (MF)
Other batteries may not be charged with this device.
The charger may not be used as a starter aid. First charge the
battery of your vehicle fully and remove the charger before
starting the vehicle.
The charger may not be used as a source of direct current or
for other purposes.
The battery charger is designed for use in dry and protected
environments at temperatures of -5 °C to +40°C.
This device is not designed to be used by children and
people with limited mental capacities or those without
experience and/or knowledge. Keep children away from the
device.
The device is not designated for commercial use.
Any other use or modifi cation to the device is considered
improper usage and may be dangerous. EAL GmbH accepts
no liability for damages caused as a result of improper use.

2. SCOPE OF DELIVERY

• 1 x Charger
• 1 x Adapter charging cable with pole callipers
• 1 x Adapter charging cable with eyes
• 1 x Operating instructions

3. SPECIFICATIONS

Dimensions: 180 x 80 x 45 [mm]
Weight: 0.465 kg
Long mains cable: 1.50 m
Length of charging cable: 1.00 m + 0.50 m adapter
charging cable
Input: 220-240 V AC 50/60 Hz
Output: 6 V mode:
Motorbike:
Auto:
Battery capacity: 6 V min 1.2 Ah max. 14 Ah
12 V min 1.2 Ah max. 150 Ah
Protection class: IP65 (only device housing, not
connection and charging cable)
Ambient temperature: -5 °C to +40 °C
6 V DC 2.5 A
12 V DC 2.5 A
12 V DC 5.0 A
7