Specifications; Proper Use Of The Product; Scope Of Delivery - APA 16621 Manuel De L'opérateur

Microprocessor battery charger,
6 V / 12 V, 8 A
CONTENT
1.

PROPER USE OF THE PRODUCT ____________ 8

2. SCOPE OF DELIVERY ___________________ 8
3. SPECIFICATIONS _____________________ 8
4. SAFETY PRECAUTIONS _________________ 9
5. EXPLANATION OF SYMBOLS _____________ 10
6. OPERATING INSTRUCTIONS _____________ 10
6.1 OVERVIEW _______________________ 10
6.2 USING THE ADAPTER CHARGING CABLE ______ 10
6.3 PREPARATION _____________________ 10
6.4 CONNECTING THE BATTERY CHARGER _______ 11
6.4.1 CONNECTING THE ADAPTER CHARGING _____ 11
CABLE WITH POLE CALLIPERS____________ 11
6.4.2 CONNECTING THE ADAPTER CHARGING _____ 11
CABLE WITH EYES ___________________ 11
6.5 CHARGING THE BATTERY _______________ 11
6.5.1 SELECTING THE CHARGING PROGRAMME_____ 11
6.6 REMOVING THE CHARGER ______________ 13
7. MAINTENANCE AND CARE ______________ 13
7.1 MAINTENANCE _____________________ 13
7.2 CARE ___________________________ 13
8. NOTES REGARDING ENVIRONMENTAL PROTECTION 13
9. CONTACT INFORMATION _______________ 13
WARNING
Read the operating instructions through
carefully prior to initial use and observe
all of the safety notes! Not observing such
may lead to personal injury, damages to
the device or your property! Store the ori-
ginal packaging, the receipt and these in-
structions so that they may be consulted
at a later date! Prior to initial use check
the contents of the packaging to ensure
that they are in perfect condition and
complete!
1. PROPER USE OF THE PRODUCT
The charger is suitable for charging open and a variety of
closed, maintenance-free lead-acid batteries, for example:
• Wet batteries (WET),
(fl uid electrolyte)
• Gel batteries (gel electrolyte)
• AGM batteries (electrolyte in fi breglass fl eece)
• Maintenance-free lead-acid batteries (MF)
Other batteries may not be charged with this device.
The charger may not be used as a starter aid. First charge the
battery of your vehicle fully and remove the charger before
starting the vehicle.
8
lead-acid batteries
The charger may not be used as a source of direct current or
for other purposes.
The battery charger is designed for use in dry and protected
environments at temperatures of -5 °C to +40°C.
This device is not designed to be used by children or persons
with limited mental capabilities or without experience and/
or lack of required specialist knowledge. Keep children away
from the device.
The device is not designated for commercial use.
Use according to the intended purpose also includes the
observance of all information in these operating instructions,
particularly the observance of the safety notes. Any other
utilisation is considered to be contrary to the intended
purpose and may lead to material damages or personal
njuries. EAL GmbH assumes no liability for damage resulting
from improper use.

2. SCOPE OF DELIVERY

• 1 x Battery charger
• 1 x Adapter charging cable with pole callipers
• 1 x Adapter charging cable with eyes
• 1 x Operating instructions

3. SPECIFICATIONS

Dimensions: 205 x 115 x 60 [mm]
Weight: 0.670 kg
Length of mains cable: 1.50 m
Length of charging cable: 1.00 m + 0.50 m
adapter charging cable
Input: 220-240 V AC
Output: 6 V mode:
12 V mode Motorbike: 14.3 V, 4 A
12 V mode Car:
Battery capacity: 6 V: 1.2 - 120 Ah
12 V: 1.2 - 180 Ah
Ambient temperature: -5 °C to +40 °C
50/60 Hz
7.2 V, 4 A
14.6 V, 8 A