After Finishing Work; Preparing For Transportation Or Storage; Transporting The Garden Pruner, Battery And; Charger - Stihl GTA 26 Notice D'emploi

English
► Always start a cut with the chain rotating at full speed and
with the bumper in contact with the wood.
► Use caution when approaching the end of a cut.
► Never put pressure on the garden pruner when reaching
the end of a cut.
► Do not cut more then one branch at the same time.
For optimum performance, observe the recommended
ambient temperature ranges, @ 24.9.
Observe all applicable laws, regulations, standards and
ordinances.

18 After Finishing Work

18.1 Preparing for Transportation or Storage

WARNING
To reduce the risk of personal injury from unintended
activation or unauthorized use, switch off the garden pruner
and remove the battery before transporting the garden
pruner or putting it down. To reduce the risk of injuries from
the sharp cutters on the chain, always cover the guide bar
with the chain scabbard before transporting or storing the

garden pruner.

To prepare the garden pruner for transportation or storage:
► Switch off the garden pruner, @ 15.2.
► Remove the battery, @ 14.2.
30
► Slide a chain scabbard over the guide bar so that it covers
the entire guide bar.
► If the battery or garden pruner became wet during
operation, allow them to dry separately and completely
before charging or storing.
19 Transporting the Garden Pruner,
Battery and Charger
19.1 Garden Pruner
When transporting the garden pruner:
► Slide a chain scabbard over the guide bar so that it covers
the entire guide bar.
► When transporting the garden pruner by hand, hold it by
the control handle with the guide bar pointing down and
your finger off the trigger switch.
► When transporting the garden pruner in a vehicle, cover
the guide bar with a chain scabbard and insert the garden
pruner securely in the carrying bag (if available). Secure
and position the garden pruner to prevent turnover, impact
and damage.

19.2 Battery

WARNING
To reduce the risk of a short circuit, which could lead to
electric shock, fire and explosion, never transport the battery
in a metal container or near metal objects (e.g., paper clips,
nails, coins, keys), @ 7.
When transporting the battery:
► Place the battery in a non-metal container or carton and
secure it against impact or damage. Never transport the
battery in a metal or other container that is capable of
conducting electricity, or near metal objects (e.g., paper
clips, nails, coins, keys).
► If you are transporting the battery in a vehicle, secure it
and its container to prevent turnover, impact and damage.
18 After Finishing Work
0458-694-8221-A