Switching Off; Checking The Garden Pruner; Checking The Guard - Stihl GTA 26 Notice D'emploi

Masquer les pouces Voir aussi pour GTA 26:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
To switch the garden pruner on:
2
► Always hold and operate the garden pruner with one hand
firmly on the control handle (1) and the other hand firmly
on the gripping surface (2).
► Depress and hold the trigger switch lockout (3) with your
thumb.
► While holding the trigger switch lockout, squeeze the
trigger switch (4) with your index finger.
The saw chain will start rotating.
The motor will not switch on unless the trigger switch lockout
and trigger switch are pressed at the same time. Once the
trigger switch is activated and the garden pruner is running,
the trigger switch lockout can be released.

15.2 Switching Off

WARNING
The saw chain will continue to rotate for a short while after
the trigger switch is released. To avoid serious or fatal injury,
avoid contact with the moving saw chain. To reduce the risk
of personal injury from unintended activation or
unauthorized use, switch off the motor, ensure the chain has
stopped and remove the battery before transporting or
putting the garden pruner down.
28
1
3
4
To switch the garden pruner off:
► Release the trigger switch so that it springs back to the
locked position. In the locked position, activation of the
trigger switch is once again blocked by the trigger switch
lockout.
The saw chain will continue to rotate for a short while after
the trigger switch is released. Take care to avoid contact
after releasing the trigger switch and when setting down
the garden pruner.

16 Checking the Garden Pruner

16.1 Checking the Guard

WARNING
The chain has many sharp cutters. If they contact your flesh,
they will cut you, even if the chain is not moving, @ 6.4.
Always wear heavy-duty work gloves, @ 6.3.
Before starting work, confirm that the guard is undamaged
and functioning properly.
► Check the guard for signs of damage. If damaged take the
garden pruner to an authorized STIHL servicing dealer to
be repaired before use.
► Flap the guard upwards and release it. The guard must
spring back to its former position. If it does not, take the
garden pruner to an authorized STIHL servicing dealer to
be repaired before use.
16 Checking the Garden Pruner
0458-694-8221-A

Publicité

Chapitres

Table des Matières
loading

Table des Matières