Troubleshooting Guide; Garden Pruner And Battery - Stihl GTA 26 Notice D'emploi

Masquer les pouces Voir aussi pour GTA 26:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

23 Troubleshooting Guide

23 Troubleshooting Guide

23.1 Garden Pruner and Battery

Always remove the battery before carrying out any inspection, cleaning or maintenance.
Condition
LEDs on
Garden Pruner
Garden pruner does
not start when
switched on.
1 LED flashes
green.
1 LED glows
red.
4 LEDs flash
red.
3 LEDs glow
red.
3 LEDs flash
red.
Garden pruner cuts
1 LED glows
out during operation.
red.
3 LEDs glow
red.
0458-694-8221-A
Possible Cause
Remedy
No electrical contact
► Remove the battery, @ 14.2.
between garden
► Visually check the electrical contacts in the battery
pruner and battery.
compartment and on the battery.
► Reinsert the battery, @ 14.1.
Battery has low
► Charge the battery, @ 11.
charge.
Battery too hot / too
► Allow the battery to warm up or cool down gradually at
cold.
ambient temperatures of about 50 °F to 68 °F (10 °C to
20 °C).
Malfunction in
► Remove the battery and reinsert it, @ 14.
battery.
► Switch on the garden pruner, @ 15.1.
► If the LEDs continue to flash, do not attempt to use.
The battery has a malfunction and must be replaced.
Garden pruner too
► Allow the garden pruner to cool down.
hot.
Malfunction in
► Remove the battery and reinsert it, @ 14
garden pruner.
► Switch on the garden pruner, @ 15.1.
► If the LEDs still flash, do not attempt to use.
The garden pruner has a malfunction and must be checked
by a servicing dealer.
Battery too hot / too
► Remove the battery, @ 14.2.
cold.
► Allow the garden pruner and battery to warm up / cool down
Garden pruner too
gradually at ambient temperatures of about 50 °F to 68 °F
hot.
(10 °C to 20 °C).
English
37

Publicité

Chapitres

Table des Matières
loading

Table des Matières